@article { author = {Irani, Mohammad and Hayati, Reza and Sarmad, Mehran and Moeen, Peiman}, title = {Simulation of Evaporation and Condensation Phenomena in the Plate-Fin Converter of the LNG Process Using the CFD Method and Assessing Aspen Muse Software Performance}, journal = {Iranian Journal of Gas Engineering}, volume = {6}, number = {1}, pages = {6-13}, year = {2019}, publisher = {Iranian Gas Institute}, issn = {2588-5251}, eissn = {2588-5251}, doi = {}, abstract = {In this paper complex fluid flow and transport phenomena in plate-fin heat exchanger for LNG process are investigated. Modeling and simulation of heat transfer and fluid flow has been done using ANSYS Fluent software. This software has limitation in simulation of multispecies biphasic flow; therefore, UDF.A 2D model was used for modeling aforementioned phenomena in one channel of heat exchanger. HYSYS software was used for calculation of species equilibrium concentration and it was linked to ANSYS using UDF. Results shows that vapor volume fraction, species composition and heat transfer coefficient for CFD and Aspen muse are in good agreement, but pressure drop is over predicted by Aspen Muse. Using the developed model, a good deal of information was obtained about transport phenomena and fluid flow in cryogenic heat exchangers, while other software packages could not provide that much information.}, keywords = {LNG,Plate-fin heat exchanger,CFD,Aspen muse}, title_fa = {شبیه‌سازی پدیده‌های تبخیر و میعان در مبدل Plate-Fin فرایند LNG با استفاده از روش CFD و ارزیابی عملکرد نرم‌افزار Aspen muse}, abstract_fa = {در این مقاله، پدیده‌های انتقال و الگوی جریان پیچیده و دما جهت فرایند LNG در مبدل حرارتی Plate–Fin بررسی شده ‌است. برای مدل‌سازی و شبیه‌سازی جریان سیال و انتقال حرارت، از نرم‌افزار ANSYS FLUENT استفاده شده است. برای شبیه‌سازی جریان دوفازی و چندجزئی، این نرم‌افزار محدودیت‌هایی دارد که البته با الصاق کدهای کمکی این نقص برطرف شده است. از مدل دوبعدی برای شبیه‌سازی پدیده‌های انتقال در یک کانال از مبدل استفاده شده است. برای محاسبۀ نرخ میعان و تبخیر، غلظت‌های تعادلی از نرم‌افزار ترمودینامیکی HYSYS استخراج گردیده و توسط UDF به نرم‌افزار CFD الصاق شده است. مقایسۀ نتایج حاصل از شبیه‌سازی CFD با نتایج نرم‌افزار Aspen Muse نشان داده که ضریب انتقال حرارت دوفازی، کسر جرمی بخار و ترکیب درصد اجزا با هم مطابقت دارند، در صورتی که افت فشار محاسبه‌شده توسط نرم‌افزار Aspen Muse نسبت به CFD بیشتر است. با استفاده از مدل توسعه‌داده‌شده، اطلاعات زیادی در خصوص پدیده‌های انتقال و الگوی جریان به دست آمد که با استفاده از نرم‌افزارهای موجود ممکن نیست.}, keywords_fa = {ال‌ان‌جی,مبدل فین-صفحه,سی‌اف‌دی,اسپن میوز}, url = {http://www.ijge.irangi.org/article_251876.html}, eprint = {http://www.ijge.irangi.org/article_251876_f2166c6d0f3397f9956c2b08a3887aae.pdf} }