@article { author = {Shahsavari, Alireza and Binaee, Alireza and Sardashti Birjandi, Mohammad Reza and Shahraki, Farhad and Sadeghi, Jafar}, title = {Dynamic Simulation and Investigation of Changes in Operating Parameters on the Amount of Sulfur Produced in the SRU Unit - a Case Study of the No 1 Refinery of South Pars Gas Complex}, journal = {Iranian Journal of Gas Engineering}, volume = {9}, number = {1}, pages = {57-75}, year = {2022}, publisher = {Iranian Gas Institute}, issn = {2588-5251}, eissn = {2588-5251}, doi = {}, abstract = {Sulfur is one of the most important products in the processing of oil and gas, which is used in important industries such as sulfuric acid production and agriculture. Hence, the improvement of the efficiency of sulfur production processes at the industrial scale has paid a lot of attention. Due to some process problems such as the presence of heavy aromatic compounds and inappropriate temperature, the efficiency of this unit decreasesTherefore, in this paper, the steady state simulation of the modified Claus process of the Sulphur Recovery unit of the first refinery of the South Pars Gas Complex using Aspen Plus software has been done. The dynamics of CO2 concentration and furnace temperature were also studied. The simulation accuracy is desirable in the stable and dynamic state, so that the average error for the simulation flow data compared to the industrial data is 2.52% and 2.11% for the dynamic and dynamic mode, respectively. In addition, the results indicate an increase for sulfur produced by increasing the furnace temperature and reducing the concentration of CO2.}, keywords = {Sulfur recovery,Modified Claus Process,Steady state and Dynamic Simulation,Aspen,Change operational parameters}, title_fa = {شبیه‌سازی دینامیکی و بررسی تغییرات پارامترهای عملیاتی بر میزان گوگرد تولیدی در واحد SRU- مطالعه موردی پالایشگاه یکم مجتمع گاز پارس جنوبی}, abstract_fa = {گوگرد یکی از مهم‌ترین محصولات جانبی فرآوری نفت و گاز است که در صنایع مهمی همچون تولید اسیدسولفوریک و صنایع کشاورزی کاربرد دارد. از این رو بهبود راندمان فرآیندهای تولید گوگرد در مقیاس صنعتی توجه فراوانی را به خود اختصاص داده است. به دلیل وجود برخی از مشکلات فرآیندی ازجمله وجود ترکیبات سنگین آروماتیک و دمای نامناسب فرآیند و وجود CO2، راندمان این واحد کاهش می‌یابد. بنابراین در این مقاله به شبیه‌سازی پایای فرایند کلاوس اصلاح‌شده واحد بازیافت گوگرد پالایشگاه یکم مجتمع گاز پارس جنوبی با استفاده از نرم‌افزار Aspen Plus پرداخته‌شده است. همچنین به بررسی دینامیکی پارامترهای غلظت CO2 و دمای کوره بر میزان گوگرد تولیدی فرایند پرداخته می‌شود. نتایج نشان می‌دهد دقت شبیه‌سازی در حالت‌پایا و دینامیک مطلوب بوده به‌طوری‌که میانگین خطا برای اطلاعات جریان‌های شبیه‌سازی در مقایسه با داده‌های صنعتی، برای حالت‌پایا و دینامیک به ترتیب ۲/۵۵ درصد و ۲/۱۱ درصد است. همچنین نتایج نشان می‌دهد که افزایش ۵۰ درصدی دمای کوره باعث افزایش دو برابری میزان گوگرد تولیدی و افزایش ۵۰ درصدی غلظتCO2  باعث کاهش ۴ درصدی میزان گوگرد تولیدی می‌گردد.}, keywords_fa = {بازیافت گوگرد,فرآیند کلاوس اصلاح‌شده,شبیه‌سازی پایا و دینامیکی,نرم افزار Aspen,تغییر پارامترهای عملیاتی}, url = {http://www.ijge.irangi.org/article_696888.html}, eprint = {http://www.ijge.irangi.org/article_696888_6958dddb0ad63bdca156daa461538416.pdf} }